Embedded Controllers

µCore3664

• H8/300H 16 bit CPU, provides enough power for the most demanding of applications.
• 28KByte of user Flash program memory & 2K of RAM.
• Advanced peripheral set, counters/timers, ADC, PWM, UART, I2C.
• Low voltage reset & watchdog timer for secure operation in industrial environments.
• Built in Pond µFlash-H8 bootloader for fast, hassle free programing.
• Convenient 40 pin (0.1 inch pitch) DIL form factor, no messing with surface mount.
• FREE industrial strength C Compiler (GCC-H8)
• LOW COST access to 16 bit technology

µCore Carrier Board

• µCore3664 Socket.
• Easy access to all I/O pins.
• 5V regulator with latching and 2.1mm barrel input.
• RS232 buffer with 9 pin D-type connector.
• Master µConnect (buffered I2C interface.
• µPod programming interface.
• 8K serial EEPROM.

Order Code : UC3664SK
Price (unit) : €69.00

µCore Starter Kit

• µCore-3664 16 bit embedded controller.
• Carrier board.
• µPod programming interface & serial cable.
• GCC C compiler/assembler with custom µCore support library.
• Documentation & development software on CD.

Order Code : UC3664SK
Price (unit) : €149.00

µFlash876 SBC

• PIC16F876 Microcontroller running at 20MHz.
• 5 MIPS peak instruction execution.
• Built in bootloader, no PIC programmer required.
• Compatible with all popular PIC16F876 compilers/assemblers.
• 8KWord (14 bit) FLASH program memory.
• 368 Bytes of on chip data RAM.
• 256 Byte on chip data EEPROM.
• 8KBytes of additional serial data EEPROM.
• Battery backed up real time clock.
• Built in RS232 compatible serial port.
• 16 Multifunction I/O lines on µStack header.
• 4 channel 10 bit ADC.
• Powerful counter/timer/PWM hardware support.
• Built in 5V regulator.
• Secure latching power connector (Molex KK)
• Supplied with Molex KK power lead, 3V RTC battery & 4 µStack PCB spacers.

µS-BS2 SBC

• Includes a Parallax BASIC Stamp 2 IC
• Enhanced BASIC Interpreter
• Free development tools (download from web)
• Re-programmable up to 10000 times
• Up to 4000 instructions/sec
• 2KByte program data (Approx 500 lines of BASIC)
• 26 Bytes User RAM
• RS232 compatible programming/application port
• 16 Digital I/O lines on µStack connector
• Built in 5V regulator
• Secure latching power connector (Molex KK).
• Supplied with Molex KK power lead and 4 µStack PCB spacers.

µS-Stamp Carrier Board

• Suitable for 24 pin Parallax Stamp or compatible modules.
• RS232 9 pin D-type connector.
• 16 Digital I/O lines on µStack connector
• Built in 5V regulator
• Secure latching power connector (Molex KK).
• Supplied with Molex KK power lead and 4 µStack PCB spacers.

µFlash and µS-BS2 Starter Kits

Starter kits provide the quickest way to get started with a µFlash or µS-BS2 controller board.

Please note that due to variations in mains voltages/connectors throughout the world, starter kits are not supplied with a mains adaptor. We recommend a 12V regulated PSU of at least 300mA capacity. We do stock suitable PSUs for some areas. Please check Components and Accessories for availability of a suitable PSU.

Starter kits include:

• µFlash876, µFlash876B or µs-BS2 SBC
• µS-P1 prototyping board
• Serial programming cable
• Molex KK terminated power lead
• Manual / software on CD.
• 8 µStack PCB Spacers, 4 M3 nuts.

In addition to the above the µS-BS2 Starter Kit also includes a printed user manual for the BASIC Stamp (400 pages with application notes) and a Parallax CD.

Item	Order Code	Price (Unit)
µFlash876 Starter Kit	UF876SK	95.00
µFlash876B Starter Kit	UF876BSK	95.00
µS-BS2 Starter Kit	USBS2SK	185.00